artix + arch + gentoo

VMS.txt

@@ -0,0 +1,11 @@
+#Disk mount, s root(se sudo nefunguje)
+vboximg-mount --rw --image /home/warezjoe/VirtualBox\ VMs/Archie/Archie.vdi -o allow_other /mnt/vdi/expanded
+
+#For crypted drive
+losetup -P /dev/loop0 /path/to/intermediate/mountpoint/vhdd
+
+#For umount
+losetup -d /dev/loop0
+
+#For lvm deativate
+lvchange -an /dev/vol_grp/log_grp1

arch.txt

@@ -0,0 +1,89 @@
+##EFI, swap, ext4, lvm, luks
+
+## perma IP without dhcp
+sudo ip a add { ip/mask } dev { interface }
+
+## ssh set up
+systemctl start sshd && passwd
+
+
+## partitioning and mounting
+fdisk /dev/sda
+
+/dev/sda1   1G  EFI
+/dev/sda2   4G  Linux swap
+/dev/sda3   rest Linux x86-64
+
+exit fdisk
+
+mkswap /dev/sda2 && \
+mkfs.fat -F 32 /dev/sda1 && \
+cryptsetup luksFormat /dev/sda3
+
+cryptsetup open /dev/sda3 cryptlvm
+
+pvcreate /dev/mapper/cryptlvm
+
+vgcreate MainLvm /dev/mapper/cryptlvm && \
+lvcreate -L 10G MainLvm -n root && \
+lvcreate -L 2G MainLvm -n home && \
+mkfs.ext4 /dev/MainLvm/root && \
+mkfs.ext4 /dev/MainLvm/home && \
+mount /dev/MainLvm/root /mnt && \
+mount --mkdir /dev/MainLvm/home /mnt/home  && \
+mount --mkdir /dev/sda1 /mnt/boot/efi
+
+## install and chroot
+pacstrap -K /mnt base linux linux-firmware
+
+## for artix
+basestrap /mnt base base-devel openrc elogind-openrc linux linux-firmware
+
+##arch
+genfstab -U /mnt >> /mnt/etc/fstab
+##artix
+fstabgen -U /mnt >> /mnt/etc/fstab 
+
+##arch
+arch-chroot /mnt
+##artix
+artix-chroot /mnt /bin/bash
+
+## time and locale
+ln -sf /usr/share/zoneinfo/Europe/Prague /etc/localtime && \
+hwclock --systohc
+
+nano /etc/locale.conf
+locale-gen
+
+## networking
+echo archie > /etc/hostname
+
+pacman -S networkmanager openssh && \
+systemctl enabled sshd && \
+systemctl enabled NetworkManager
+
+##artix
+pacman -S cryptsetup-openrc openssh-openrc system/lvm2-openrc vim grub os-prober efibootmgr
+
+## password set
+passwd
+
+## Bootloader and iniramfs
+nano /etc/mkinitcpio.conf
+
+##arch (systemd)
+HOOKS=(systemd keyboard sd-vconsole sd-encrypt lvm2)
+##artix
+HOOKS=(udev keyboard keymap consolefont encrypt lvm2)
+
+##Grub
+GRUB_CMDLINE_LINUX="cryptdevice=UUID=424e46f9-ffdb-4825-a83a-1cbb53c65627:cryptlvm root=/dev/MainLvm/root"
+GRUB_ENABLE_CRYPTODISK=y
+grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=grub
+grub-mkconfig -o /boot/grub/grub.cfg
+
+
+mkinitcpio -P
+
+

artix_scripts/env.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+#VARS
+
+DISK="/dev/sda"
+CRYPT_N="lvm-system"
+LVM_N="lvmSystem"

artix_scripts/ip-sshd.sh

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+ip a add 192.168.57.132/24 dev eth1 && \
+rc-service sshd start

artix_scripts/pre-chroot.sh

@@ -0,0 +1,42 @@
+#!/bin/bash
+
+source env.sh
+
+#Parted
+pacman -Sy && \
+pacman -S parted && \
+parted -s $DISK mklabel gpt && \
+parted -s -a optimal $DISK mkpart "primary" "fat32" "0%" "512MiB" && \
+parted -s $DISK set 1 esp on && \
+parted -s -a optimal $DISK mkpart "primary" "ext4" "512MiB" "100%" && \
+parted -s $DISK set 2 lvm on && \
+
+#Cryptosetup
+cryptsetup luksFormat  $DISK\2 && \
+cryptsetup open $DISK\2 lvm-system && \
+
+#Lvm setup
+pvcreate /dev/mapper/$CRYPT_N
+vgcreate $LVM_N /dev/mapper/$CRYPT_N
+
+lvcreate -L 2G  $LVM_N -n volSwap && \
+lvcreate -L 10G  $LVM_N -n volRoot && \
+lvcreate -L 2G  $LVM_N -n volHome && \
+
+#Filesystems and mount
+mkswap /dev/$LVM_N/volSwap && \
+mkfs.fat -n ESP -F 32 /dev/$DISK\1 && \
+mkfs.ext4 -L volRoot /dev/$LVM_N/volRoot && \
+mkfs.ext4 -L volHome /dev/$LVM_N/volHome && \
+swapon /dev/$LVM_N/volSwap && \
+mount /dev/$LVM_N/volRoot /mnt && \
+mkdir -p /mnt/home && \
+mount /dev/$LVM_N/volHome /mnt/home && \
+mkdir -p /mnt/boot/efi && \
+mount /dev/$DISK\1 /mnt/boot/efi && \
+
+#basestrap, fstab, chroot
+basestrap /mnt base base-devel openrc elogind-openrc linux-hardened linux-hardened-headers linux-firmware  && \
+fstabgen -U /mnt >> /mnt/etc/fstab  && \
+echo "tmpfs	/tmp	tmpfs	rw,nosuid,noatime,nodev,size=4G,mode=1777	0 0" >> /mnt/etc/fstab  && \
+artix-chroot /mnt /bin/bash

artix_scripts/re-chroot.sh

@@ -0,0 +1,11 @@
+#!/bin/bash
+
+source env.sh
+
+cryptsetup open $DISK\2 lvm-system && \
+lvchange -ay $LVM_N/volHome  && \
+lvchange -ay $LVM_N/volRoot  && \
+mount /dev/$LVM_N/volRoot /mnt && \
+mount /dev/$LVM_N/volHome /mnt/home && \
+mount /dev/$DISK\1 /mnt/boot/efi && \
+artix-chroot /mnt /bin/bash

gentoo.txt

@@ -2,7 +2,7 @@
 
 
 ####################### chroot to middle of install
-mount /dev/sda2 /mnt/gentoo && \
+mount /dev/sda3 /mnt/gentoo && \
 mount /dev/sda1 /mnt/gentoo/efi && \
 mount --types proc /proc /mnt/gentoo/proc && \
 mount --rbind /sys /mnt/gentoo/sys && \
@@ -26,9 +26,9 @@ cfdisk /dev/sda #GPT, sda1 type - efi, sda2 type - Linux root (x86-64)
 mkfs.fat -F 32 /dev/sda1 && \
 mkfs.ext4 /dev/sda2 && \
 mkdir --parents /mnt/gentoo && \
-mount /dev/sda2 /mnt/gentoo && \
+mount /dev/sda3 /mnt/gentoo && \
-mkdir --parents /mnt/gentoo/efi \
+mkdir --parents /mnt/gentoo/boot \
-mount /dev/sda1 /mnt/gentoo/efi
+mount /dev/sda1 /mnt/gentoo/boot
 
 ## download and extract stage3
 cd /mnt/gentoo
@@ -55,7 +55,7 @@ mount --rbind /dev /mnt/gentoo/dev && \
 mount --make-rslave /mnt/gentoo/dev && \
 mount --bind /run /mnt/gentoo/run && \
 mount --make-slave /mnt/gentoo/run && \
-chroot /mnt/gentoo /bin/bash
+chroot /mnt/gentoo /bin/bash    
 
 source /etc/profile && export PS1="(chroot) ${PS1}"
 
@@ -95,7 +95,6 @@ env-update && source /etc/profile && export PS1="(chroot) ${PS1}"
 
 ## Linux Firmware for non-FOSS
 emerge sys-kernel/linux-firmware && \
-emerge sys-kernel/gentoo-kernel && \
 emerge --depclean && \
 emerge sys-kernel/installkernel && \
 emerge sys-kernel/gentoo-sources && \
@@ -118,7 +117,16 @@ nano /etc/fstab
 
 ## Networking
 echo gentoo > /etc/hostname
-emerge net-misc/dhcpcd && rc-update add dhcpcd default
+emerge --ask --noreplace net-misc/netifrc
+
+nano /etc/conf.d/net
+config_enp0s18="192.168.6.9 netmask 255.255.255.0 brd 192.168.6.255" #config_eth0="dhcp"
+routes_enp0s18="default via 192.168.6.1"
+
+cd /etc/init.d && \
+ln -s net.lo net.enp0s18 && \
+rc-update add net.enp0s18 default
+
 nano /etc/hosts
 
 ## Password